Front and Rear Replacement Squeegee Blade Set for Stinger 18S, 18SE and 20ST Floor Scrubbers
Maintain effective water recovery with the UC-18SRBC Front and Rear Replacement Squeegee Blade Set. Designed for compatible Stinger 18S, Stinger 18SE and Stinger 20ST automatic floor scrubbers, this replacement set includes both front and rear squeegee blades to support routine floor machine maintenance.
The squeegee assembly helps collect dirty water and cleaning solution from the floor after scrubbing. Over time, normal use can wear the blade edges and affect contact with the floor, potentially leaving water trails, streaks or residual moisture. Replacing worn blades helps maintain consistent water pickup and supports reliable cleaning results in commercial facilities.
Product Highlights
- Front and rear replacement squeegee blades included
- Designed for compatible Stinger 18S, 18SE and 20ST floor scrubbers
- Front blade measures 33-1/4 inches
- Rear blade measures 35-7/16 inches
- Primothane blade material
- Supports water recovery during automatic floor scrubbing
- Replacement set SKU: UC-18SRBC
Compatible Floor Machines
This replacement blade set is intended for the three floor scrubber models shown below. Confirm your machine model and existing squeegee configuration before ordering.
Designed for the compatible 18-inch electric automatic floor scrubber identified as the UNO-18FSE.
View Machine Details
For compatible Stinger 18S battery-powered automatic floor scrubbers used in routine commercial floor care.
View Machine Details
Designed for compatible Stinger 20ST battery-powered automatic floor scrubbers.
View Machine Details
Front and Rear Blades for Routine Maintenance
This set includes two blades with different lengths for the front and rear positions of the compatible squeegee assembly. The front blade measures 33-1/4 inches, while the rear blade measures 35-7/16 inches. Check the blade positions carefully during replacement to ensure each blade is installed in the correct location.
Primothane Squeegee Blade Material
The blades are made from Primothane and are intended for use in commercial floor scrubber water recovery systems. Regular inspection can help identify worn edges, tears or damage that may interfere with effective water pickup.
Compatibility Reminder: This set is intended for compatible Stinger 18S, Stinger 18SE and Stinger 20ST floor scrubbers. Confirm your exact model and squeegee assembly before ordering. The image paths above are placeholders and must be replaced with the correct product image paths before publishing.
Buying Guide: Front and Rear Replacement Squeegee Blade Set
The UC-18SRBC Front and Rear Replacement Squeegee Blade Set is designed for compatible Stinger 18S, Stinger 18SE and Stinger 20ST automatic floor scrubbers. Selecting the correct replacement set helps maintain water recovery performance and supports routine floor machine maintenance.
Start by identifying the exact model of your automatic floor scrubber. This replacement set is intended for the following equipment:
- Stinger 18SE, listed as the UNO-18FSE electric floor scrubber
- Stinger 18S battery-powered automatic floor scrubber
- Stinger 20ST battery-powered automatic floor scrubber
Check your machine's identification label and equipment documentation before ordering. If the squeegee assembly has been changed, verify that this set matches the assembly currently installed.
This set includes two blades with different lengths for the corresponding positions in the squeegee assembly.
- Front blade: 33-1/4 inches
- Rear blade: 35-7/16 inches
Confirm the blade positions and lengths before installation. The front and rear blades are not the same length, so install each blade in its intended position according to the machine manufacturer's instructions.
The UC-18SRBC is a set containing both a front and a rear replacement squeegee blade. If both blades show wear, replacing them together can simplify scheduled maintenance.
If only one blade appears damaged, inspect the entire assembly and confirm the correct replacement part before deciding which components to replace.
The squeegee assembly helps collect dirty water and cleaning solution after scrubbing. Worn, torn or damaged blade edges can interfere with consistent contact with the floor.
- Inspect the blades for visible wear, tears and damage.
- Look for uneven blade contact across the cleaning path.
- Check for persistent water trails or residual moisture after scrubbing.
- Review blade adjustment and other recovery-system components if performance remains inconsistent.
The front and rear blades in this set are made from Primothane. When selecting replacement blades, make sure the material and dimensions are appropriate for your machine's squeegee assembly and intended floor-cleaning application.
Follow the
Buying Guide: Front and Rear Replacement Squeegee Blade Set
The UC-18SRBC Front and Rear Replacement Squeegee Blade Set is designed for compatible Stinger 18S, Stinger 18SE and Stinger 20ST automatic floor scrubbers. Selecting the correct replacement set helps maintain water recovery performance and supports routine floor machine maintenance.
Start by identifying the exact model of your automatic floor scrubber. This replacement set is intended for the following equipment:
- Stinger 18SE, listed as the UNO-18FSE electric floor scrubber
- Stinger 18S battery-powered automatic floor scrubber
- Stinger 20ST battery-powered automatic floor scrubber
Check your machine's identification label and equipment documentation before ordering. If the squeegee assembly has been changed, verify that this set matches the assembly currently installed.
This set includes two blades with different lengths for the corresponding positions in the squeegee assembly.
- Front blade: 33-1/4 inches
- Rear blade: 35-7/16 inches
Confirm the blade positions and lengths before installation. The front and rear blades are not the same length, so install each blade in its intended position according to the machine manufacturer's instructions.
The UC-18SRBC is a set containing both a front and a rear replacement squeegee blade. If both blades show wear, replacing them together can simplify scheduled maintenance.
If only one blade appears damaged, inspect the entire assembly and confirm the correct replacement part before deciding which components to replace.
The squeegee assembly helps collect dirty water and cleaning solution after scrubbing. Worn, torn or damaged blade edges can interfere with consistent contact with the floor.
- Inspect the blades for visible wear, tears and damage.
- Look for uneven blade contact across the cleaning path.
- Check for persistent water trails or residual moisture after scrubbing.
- Review blade adjustment and other recovery-system components if performance remains inconsistent.
The front and rear blades in this set are made from Primothane. When selecting replacement blades, make sure the material and dimensions are appropriate for your machine's squeegee assembly and intended floor-cleaning application.
Follow the manufacturer's recommendations for installation, adjustment, cleaning and replacement intervals.
Recommended for Compatible Stinger Floor Scrubbers
Choose the UC-18SRBC set when you need both front and rear replacement squeegee blades for a compatible Stinger 18S, Stinger 18SE or Stinger 20ST floor scrubber. Verify the machine model, blade lengths and assembly configuration before ordering.
Choose This Set When
You need a front and rear blade set with a 33-1/4-inch front blade and a 35-7/16-inch rear blade for compatible equipment.
Verify Before Ordering When
Your machine model is uncertain, the existing blades have different dimensions or the squeegee assembly has been modified from its original configuration.
Applications for the UC-18SRBC Front and Rear Squeegee Blade Set
The UC-18SRBC Front and Rear Replacement Squeegee Blade Set is designed for compatible Stinger 18S, Stinger 18SE and Stinger 20ST automatic floor scrubbers. These replacement blades help maintain the squeegee assembly's ability to collect dirty water and cleaning solution after scrubbing, supporting effective water recovery during routine commercial floor care.
Maintain the water recovery system on the compatible 18-inch electric automatic floor scrubber identified as the UNO-18FSE. Replacing worn front and rear squeegee blades helps support consistent water pickup during routine cleaning operations.
Verify the machine identification and existing squeegee assembly before installing replacement blades.
Support routine maintenance of the Stinger 18S battery-powered automatic floor scrubber. Inspect the front and rear blade edges regularly for wear or damage that could affect floor contact and water recovery.
Replace blades when necessary and follow the equipment manufacturer's instructions for proper installation and adjustment.
Keep the compatible Stinger 20ST floor scrubber ready for scheduled cleaning by maintaining its squeegee assembly. Worn or damaged blades may leave water trails or residual moisture after scrubbing, making regular inspection an important part of equipment care.
Confirm that the replacement set matches your machine's installed squeegee assembly before ordering.
Commercial and Institutional Cleaning Environments
Support routine floor scrubber maintenance in warehouses and distribution facilities where consistent water recovery is important across frequently cleaned floor areas. Inspect blade condition as part of scheduled equipment maintenance.
Maintain automatic floor scrubbers used in retail spaces, showrooms and customer-facing areas. Properly maintained squeegee blades help collect cleaning solution and recovered water during normal scrubbing operations.
Support scheduled floor care in educational buildings, public facilities and other institutional environments. Routine inspection can help identify blade wear before it begins to affect water pickup.
Maintain compatible automatic floor scrubbers used in manufacturing areas, offices and other commercial spaces. Replace worn blades as needed to help keep the water recovery system operating as intended.
When Should You Replace the Squeegee Blades?
- Visible wear: The blade edges show wear, tears or other damage.
- Uneven water recovery: The squeegee does not maintain consistent contact with the floor.
- Residual water: Water trails or excess moisture remain after scrubbing.
- Scheduled maintenance: The blades are due for inspection or replacement under your facility's maintenance program.
Two-Blade Set: The UC-18SRBC includes one 33-1/4-inch front blade and one 35-7/16-inch rear blade. Confirm the blade positions and dimensions against your machine before installation.
Compatibility Reminder: This set is intended for compatible Stinger 18S, Stinger 18SE and Stinger 20ST floor scrubbers. Verify your exact machine model and squeegee assembly before ordering.
Frequently Asked Questions
Which floor scrubbers are compatible with the UC-18SRBC squeegee blade set?
This front and rear replacement squeegee blade set is intended for compatible Stinger 18S, Stinger 18SE and Stinger 20ST automatic floor scrubbers. Verify your exact machine model and installed squeegee assembly before ordering.
Does this set include both front and rear squeegee blades?
Yes. The UC-18SRBC set includes one front replacement squeegee blade and one rear replacement squeegee blade.
What are the dimensions of the included blades?
The front blade measures 33-1/4 inches, and the rear blade measures 35-7/16 inches. Confirm these dimensions against your existing blades and machine configuration before ordering.
What material are the replacement squeegee blades made from?
The blades are made from Primothane. Confirm that this material and the blade dimensions are appropriate for your machine's squeegee assembly.
What does a squeegee blade do on an automatic floor scrubber?
The squeegee assembly collects dirty water and cleaning solution from the floor after scrubbing and directs the recovered liquid toward the machine's recovery system. Proper blade contact helps support consistent water pickup.
How do I know when my squeegee blades need replacement?
Inspect the blades for worn edges, tears or visible damage. Persistent water trails, residual moisture or inconsistent pickup may also indicate a problem. Check blade adjustment, floor conditions and other recovery-system components before determining that blade replacement is necessary.
Can worn squeegee blades leave water on the floor?
Yes. Worn or damaged blade edges can prevent consistent contact with the floor and contribute to residual water or streaks. Correct adjustment and proper machine maintenance are also important for effective water recovery.
Can I replace only one blade instead of the complete set?
This product is sold as a front and rear blade set. If only one blade appears worn, inspect both blades and confirm the correct replacement part for your machine before purchasing a different configuration.
How do I confirm that this set fits my floor scrubber?
Check your machine's model identification label, review the equipment documentation and compare the existing blade lengths with the listed dimensions. If the machine has a modified or replacement squeegee assembly, verify compatibility before ordering.
How should I maintain replacement squeegee blades?
Inspect the blades regularly for debris, wear and damage. Clean and adjust the squeegee assembly according to the floor scrubber manufacturer's instructions, and replace blades when their condition begins to affect water recovery.
↑ Back To Top
People Who Bought This Also Bought
-
UNO-18FSE $100 Off
$2,678.00
$1,495.00
$1,395.00
-
-
-