Open Gear Lubricant
OPEN GEAR LUBRICANT is a high viscosity tar-based lubricant that is specially designed for gears, chains, cables, wire ropes, sprockets, industrial machinery, and heavy construction equipment. OPEN GEAR LUBRICANT provides excellent protection against rust and corrosion by repelling water from surfaces. Its outstanding stretching capabilities ensure complete coverage, extending machinery life and reducing maintenance and downtime. OPEN GEAR LUBRICANT reduces noise and safeguards gears under heavy loads. With a superior temperature range of +20�F to +175�F, this lubricant is a versatile solution for various industrial applications.
Directions
Shake can well before using. Remove protective cap. Hold can 6 to 8 inches from surfaces to be sprayed. Apply an even coat to surface. Turn on machinery and allow lubricant to spread over all working surfaces. Apply a second thinner coating to insure adequate lubrication. Reapply as needed to lubricate and protect equipment. After spraying, turn can upside down and spray until nozzle is clear.
Features & Benefits
- USDA Authorized
- Clings to Vertical & Overhead Surfaces
- Fast Tacking Formula Prevents Sling-Off
- Recoats with Each Revolution
- Does Not Drip or Run
- Heavy Service Temperature Range +20 deg F to +175 deg F
- Contains No Chlorinated or Fluorinated Solvents
Recommended Uses
- Open Gears
- Chains and Cables
- Wire Ropes
- Vertical and Overhead Surfaces
- Rotating Equipment
- Outdoor or Harsh Conditions