Pene-Lube Ultra Penetrating Lubricant
PENE-LUBE ULTRA is a scientifically formulated penetrating oil and rust dissolver containing micron size particles of PTFE and molybdenum disulfide particles into the threads, crevices, etc. These particles act as millions of tiny ball bearings to prevent seizing and galling while the parts are being removed. This product is designed to be used on all dismantling jobs throughout the plant, shop, or wherever parts are frozen or hard to operate. Quickly loosens corroded nuts, studs, bolts, flanges, and pipe joints. Contains no silicones or chlorinated solvents which affect plastics, lacquers, insulation and paint. Forceful jet-spray aids in rapid penetration through rust and corrosion to free frozen parts. Leaves a long-lasting, lubricating film which defends against future corrosion. Provides effective lubrication over a broad range of temperatures and pressures
Directions
Shake well. Remove protective cap and point spray opening in desired direction. Holding container 6-12 inches from surface to be treated, spray product liberally, saturating joints. Allow to set 5-10 minutes and breakout. For extremely difficult jobs, saturate joints and allow to set 5-10 minutes, then tap lightly with a hammer and break out.
Features & Benefits
- Fortified with Moly & PTFE for Added Pressure and Wear Resistance
- Contains No Silicones or Chlorinated Solvents
- Quickly Cuts Through Rust and Corrosion
Recommended Uses
- Fasteners & hardware: nuts, bolts, screws, locks, hinges
- Tools & mechanical parts: chains, cables, rollers, conveyors
- General moving components
- Color:
- Brown to Amber
- Fragrance:
- Petroleum Solvent Odor
- Spray Pattern:
- Stream/Jet
- Flash Point:
- > 110 °F (43 °C)
- Dielectric Strength:
- Not determined
- VOC Content:
- 12%
- Propellant:
- No
- Can Size:
- 16 oz
- Net Weight:
- 11 oz
- Extender Tube:
- Yes
- Packaged:
- 12 cans per case
- Ozone Depleting Compounds:
- None
- VOC Compliant :
- Yes
- Recyclable Packaging:
- Yes