Athea 140 Concrete Cleaner and Etch Acid Fragrance - 4 x 1 Gal.

Recommended Applications

• Concrete floor preparation for painting or sealing
• Driveway surface preparation
• Warehouse floor etching
• Loading dock surface treatment
• Hangar floor preparation
• Masonry block cleaning and etching
• Brick surface preparation
• Grouting and joint preparation

Why Use Concrete Cleaner & Etch?

• Essential for proper coating adhesion
• Extends life of paints and sealers
• One-step cleaning and etching process
• Professional surface preparation results
• Neutralizes alkalinity for better coating performance
• Opens pores for maximum penetration

Usage Tips & Best Practices

• Dilute 1 Gal. product with 5 Gal. of water
• Sweep floor to remove loose soil first
• For heavy soil, pre-clean with strong detergent
• Swab solution onto surface with broom or brush
• Allow to work for 10 minutes or until fizzing stops
• Rinse thoroughly with clean water
• Allow surface to dry completely before sealing or painting
• Use only plastic containers for mixing - not metal
• Use outdoors or in well-ventilated area

FAQ

What is this product used for?

Prepares concrete surfaces for painting or sealing by cleaning, etching, and neutralizing alkalinity.

What dilution ratio should I use?

Mix 1 Gal. of product with 5 Gal. of water for etching application.

How long does it take to work?

Allow 10 minutes or until bubbling and fizzing stops before rinsing.

Does it need to be rinsed?

Yes, rinse thoroughly with clean water and allow to dry completely before coating.

What surfaces can it be used on?

Concrete floors, walls, driveways, brick, masonry block, flagstone, and grouting.

Can I use metal containers for mixing?

No, use only plastic containers. Do not store in metal pails, drums, or sprayers.