(10) Wire Mesh Bins Chrome

Quantum QMB524C Wire Mesh Stack and Hang Bin, 11" x 4-3/4" x 4", 10/Carton

Open Mesh Storage for Visible and Accessible Inventory

The Quantum QMB524C Wire Mesh Stack and Hang Bin provides an open storage solution for organizing parts, supplies, medical items, and other inventory that benefits from visibility and easy access. Its chrome-finished wire mesh construction uses a 3/8" x 3/8" grid pattern that allows stored contents to remain visible while the open hopper design provides convenient access for picking.

Each carton contains 10 bins. The QMB524C includes a rear hanger for use with compatible louvered wall panels or rail systems, while optional side hangers allow the bins to be stacked. The bin measures 11 inches long by 4-3/4 inches wide by 4 inches high on the outside, with inside dimensions of 10-3/8 inches long by 4-1/4 inches wide by 3-3/4 inches high.

Wire Mesh Visibility

The QMB524C features a 3/8-inch by 3/8-inch mesh pattern that provides visibility into the storage area. This open construction makes it easier to identify stored items without removing the bin from its storage position.

The mesh design also provides an open storage environment for suitable applications where maintaining visibility of parts and supplies is important.

Designed for Hanging Storage

A strong rear hanger is built into the QMB524C, allowing the bin to hang from compatible louvered wall panels or rail systems. This provides an alternative to placing storage bins directly on shelves or work surfaces.

Before installation, customers should verify that the selected louvered panel or rail system is compatible with the bin and appropriate for the intended storage arrangement.

Optional Stacking Capability

The QMB524C can be configured for stacking when the appropriate optional side hangers are used. These side hangers are sold separately and allow compatible mesh bins to be positioned one on top of another.

The optional stacking hardware should not be considered part of the standard QMB524C carton unless purchased separately.

Open Hopper Design

The open hopper configuration provides access to stored contents from the front of the bin. This design can be useful for frequently accessed parts and supplies where quick picking is important.

The actual suitability of the bin depends on the size and weight of the items being stored. Customers should compare their products with the listed inside dimensions before ordering.

Chrome-Finished Construction

The QMB524C features a chrome finish over its wire mesh construction. The manufacturer identifies the mesh bins as having an ultra-strong design intended to provide substantial hanging capacity for suitable storage applications.

Customers should evaluate the intended environment and stored items when determining whether this mesh bin is appropriate for their application.

Optional Labeling Accessories

Optional label holders are available for the Quantum Mesh Bin series. These accessories can provide an additional method of identifying stored contents and organizing inventory locations.

Label holders are sold separately and are not included with the standard QMB524C carton.

Organize Parts and Supplies Efficiently

The QMB524C is suited to organized storage of smaller items that need to remain visible and accessible. Its rear hanger supports wall-mounted or rail-mounted storage, while optional side hangers provide an additional stacking configuration.

When selecting this bin, compare the stored items with the 10-3/8" L x 4-1/4" W x 3-3/4" H inside dimensions rather than the outside dimensions.

Key Features

• Wire mesh stack and hang bin
• Chrome finish
• 3/8" x 3/8" wire mesh grid pattern
• 11" L x 4-3/4" W x 4" H outside dimensions
• 10-3/8" L x 4-1/4" W x 3-3/4" H inside dimensions
• 10 bins per carton
• Built-in rear hanger
• Compatible with louvered wall panels or rail systems
• Optional side hangers for stacking
• Open hopper design for easy picking
• Visible wire mesh construction
• Optional label holders available
• Designed for parts, supplies, medical items, and other suitable inventory

What's Included

• 10 x Quantum QMB524C Wire Mesh Stack and Hang Bins

Buying Guide for the Quantum QMB524C

The QMB524C is designed for customers who need visible, accessible storage for smaller parts, supplies, and inventory. Its wire mesh construction provides visibility while the rear hanger supports use with compatible louvered panels or rail systems.

Who Should Buy the QMB524C?

The QMB524C can be a practical choice for facilities that need organized storage for frequently accessed items and want the flexibility of hanging or optional stacking configurations.

Check the Inside Dimensions

The QMB524C has outside dimensions of 11" L x 4-3/4" W x 4" H and inside dimensions of 10-3/8" L x 4-1/4" W x 3-3/4" H.

Measure the items you plan to store and compare them with the inside dimensions. The outside dimensions should be used when planning the overall storage footprint, while the inside dimensions are more important for determining item fit.

Consider the Hanging Arrangement

The built-in rear hanger is designed for use with compatible louvered wall panels or rail systems. Verify the supporting system before ordering to ensure that it is appropriate for the intended installation.

Consider Optional Stacking Accessories

If stacked storage is required, optional side hangers are available separately. Confirm the appropriate accessory before ordering, since the standard QMB524C carton contains the bins only.

Consider Labeling Needs

Optional label holders are available for the Mesh Bin series. If inventory identification is important, determine whether a compatible label holder should be purchased with the bins.

Applications for the Quantum QMB524C

The Quantum QMB524C is designed for organized storage of smaller parts, supplies, and inventory in suitable commercial, industrial, medical, maintenance, and facility environments. Its open mesh construction provides visibility while the rear hanger allows the bin to be used with compatible wall panels or rail systems.

Parts and Component Storage

The QMB524C can be used to organize small parts and components that need to remain visible and readily accessible. The open mesh design allows users to identify stored contents while the hopper opening provides access for picking.

Maintenance and Service Areas

Maintenance departments can use mesh bins to organize frequently accessed components, replacement items, and service supplies. The rear hanger allows suitable bins to be positioned on compatible louvered panels or rail systems.

Medical and Healthcare Storage

The manufacturer identifies the QMB524C as suitable for applications such as IV fluid storage and other situations where hanging capacity is important. Facilities should evaluate their specific storage, cleaning, and environmental requirements before selecting the bin for healthcare use.

Warehouses and Inventory Areas

Warehouses can use the QMB524C to separate smaller inventory items into dedicated storage locations. The mesh construction makes the contents visible, which can help with identification during routine picking and replenishment.

For hanging installations, verify that the selected rail or louvered panel is compatible with the rear hanger and suitable for the intended storage arrangement.

Workshops

Workshops can use the QMB524C to organize smaller components and supplies that are frequently needed during routine work. The open hopper provides convenient access while the mesh construction allows the contents to remain visible.

Commercial Storage Areas

The compact dimensions of the QMB524C make it useful for commercial storage areas where smaller products and supplies need dedicated organization. The hanging configuration can help make use of available wall or rail space.

Supply and Equipment Areas

Supply rooms and equipment areas can use the QMB524C to organize items that need to remain easy to identify and access. Optional labeling accessories can provide additional organization when different parts or supplies are stored in multiple bins.

Typical Storage Applications

Hanging Applications

The built-in rear hanger allows the QMB524C to be mounted on compatible louvered wall panels or rail systems. Before installation, verify the compatibility and load suitability of the supporting storage system.

Stacking Applications

For stacking configurations, optional side hangers are available separately. Use the appropriate accessories and confirm that the resulting arrangement is suitable for the intended application.

Visibility and Picking

The 3/8-inch by 3/8-inch mesh pattern provides visibility of stored contents, while the open hopper design supports access to items from the front. This combination can be useful in areas where inventory needs to be identified and retrieved regularly.

Frequently Asked Questions

The following FAQs address common questions about the Quantum QMB524C Wire Mesh Stack and Hang Bin, including dimensions, carton quantity, hanging, stacking, construction, and applications.

What is the Quantum QMB524C?

The QMB524C is a wire mesh stack and hang bin designed for organizing parts, supplies, medical items, and other suitable inventory.

What are the dimensions of the QMB524C?

The outside dimensions are 11" L x 4-3/4" W x 4" H. The inside dimensions are 10-3/8" L x 4-1/4" W x 3-3/4" H.

How many QMB524C bins come in a carton?

The QMB524C is supplied in a carton quantity of 10 bins.

What is the carton weight?

The listed carton weight for the QMB524C is 15 pounds.

What is the QMB524C made from?

The QMB524C is constructed as a wire mesh bin with a chrome finish.

What is the mesh size?

The wire mesh uses a 3/8" x 3/8" grid pattern.

Can the QMB524C be hung?

Yes. The QMB524C includes a rear hanger designed for use with compatible louvered wall panels or rail systems.

Can the QMB524C be stacked?

Yes. Optional side hangers are available separately and allow compatible mesh bins to stack one on top of another.

Are the side stacking hangers included?

No. The optional side hangers are sold separately and are not included with the standard QMB524C carton.

Does the QMB524C have an open front?

Yes. The bin has an open hopper design intended to provide convenient access to stored contents.

Can I see the contents through the QMB524C?

Yes. The 3/8-inch by 3/8-inch mesh pattern provides visibility of the bin's contents.

Does the QMB524C have a label holder?

Optional label holders are available for the Quantum Mesh Bin series. They are sold separately and are not included with the standard QMB524C package.

What can I store in the QMB524C?

The bin can be used for suitable parts, components, supplies, medical items, IV fluid storage, and other inventory that fits within the listed inside dimensions.

Can the QMB524C be used for IV fluid storage?

Yes. Quantum identifies IV fluid storage as an appropriate application for its Mesh Bin design. Customers should still verify that the specific bin configuration and facility requirements are appropriate for the intended use.

Can the QMB524C be used in a warehouse?

Yes. The QMB524C can be used for suitable warehouse inventory organization where its dimensions and hanging or stacking configuration meet the application requirements.

Can the QMB524C be mounted on any rail?

The rear hanger is designed for compatible louvered wall panels or rail systems. Verify the specific supporting system before installation.

What is the difference between inside and outside dimensions?

Outside dimensions describe the overall footprint of the bin, while inside dimensions describe the available storage space. For item fit, compare the stored item with the inside dimensions.

Is the QMB524C sold individually?

The manufacturer lists a carton quantity of 10. Confirm the current ordering quantity before purchasing.

What accessories are available for the QMB524C?

Optional side hangers are available for stacking, and optional label holders are available for identification. These accessories are sold separately.

What should I verify before ordering the QMB524C?

Verify the exact QMB524C model, inside dimensions, 10-bin carton quantity, selected hanging system, and whether optional side hangers or label holders are required.

Is the QMB524C suitable for commercial storage?

Yes. The QMB524C is designed for organized storage applications involving parts, supplies, medical items, and other suitable inventory in commercial and facility environments.

What is the finish of the QMB524C?

The QMB524C has a chrome finish.