17" Black Type 2 Crevice Tool Attachment
This 17" crevice tool attachment is designed for commercial vacuum cleaning applications where extended reach is useful for cleaning narrow spaces, edges and other difficult-to-access areas. The long, narrow design allows operators to reach into areas that may be difficult to access with a standard floor tool.
17" Extended-Length Design
The 17" length provides extended reach for cleaning narrow spaces and hard-to-reach areas. The elongated crevice design can be particularly useful around equipment, along edges and in other confined areas where a conventional vacuum tool may not provide sufficient reach.
High-Impact Polystyrene Construction
The crevice tool is constructed from high-impact polystyrene and features a black finish. The rigid construction is designed for routine commercial vacuum cleaning applications.
1-1/2" Connection
This crevice tool features a 1-1/2" neck size and is designed to fit compatible 1-1/2" hose or cuff connections. Verify your existing hose and equipment dimensions before ordering.
Angled End
The angled end helps position the opening into narrow spaces, along edges and around equipment. This design provides additional flexibility when vacuuming areas that are difficult to reach with a straight floor tool.
Type 2 Connection
This crevice tool uses a Type 2 connection. The compatibility guide below identifies the commercial vacuum and floor-care brands associated with the Type 2 connector configuration.
Floor Tool & Wand Compatibility Guide
Use the compatibility chart below to identify the connector type associated with compatible floor-care brands and equipment. The highlighted row identifies the connector type used by this product.
| Connector |
Connection Type |
Compatible Brands |
| Type 1 |
1 9/16" |
Advance®, Nilfisk®, Centaur®, Crusader®, Husky®, Mastercraft®, Mercury®, Michaels®, Milwaukee®, Minuteman®, Nortech®, Pacific Steamex®, Powr-Flite®, Prestige®, ProTeam®, Sandia®, Tiger-Vac®, Tornado®, Vac-U-Max®, Wal-Vac®, Windsor® |
|
Type 2
This Product
|
1/2" |
Black & Decker®, Castex®, Dayton®**, Doyle®, General Floorcraft®, Goodway®, Hoffman®, Hoover®, Kaivac®, Kent® (Nilfisk)®, Lamson® (Gardner), Master Power®, NSS®, Nikro®, Nobles®, Pullman®, Sears®**, Shop-Vac®**, Star®, Tennant® |
| Type 3 |
Pull Pin |
Alto® (Clarke), Pacific Steamex®** |
| Type 7 |
Grooved Steel |
Tornado® (Breuer) |
Brand names and trademarks are shown for compatibility reference only. **Compatibility notes marked with two asterisks are reproduced from the current compatibility key.
Extended-Reach Commercial Vacuum Cleaning
The 17" crevice tool is useful for professional cleaning applications where vacuuming requires access to narrow or confined areas. Its extended length and angled design can help operators clean around equipment, along edges and in other areas that may be difficult to reach with larger vacuum accessories.
For proper fit, verify both the Type 2 connection and the required hose or cuff dimensions before ordering.
- Product Type:
- Crevice Tool Attachment
- Length:
- 17"
- Connector Type:
- Type 2
- Neck Size:
- 1-1/2"
- Hose/Cuff Fit:
- 1-1/2"
- Construction:
- High-Impact Polystyrene
- Color:
- Black
- Design:
- Angled End
- Unit:
- 1 Each
Buying Guide
When selecting a crevice tool for a commercial vacuum, the most important considerations are the connector type, connection size and tool length. This 17" crevice tool uses a Type 2 connection and a 1-1/2" neck designed for compatible 1-1/2" hose or cuff connections.
Confirm the Connector Type
This crevice tool uses a Type 2 connector. The compatibility guide in the Overview section identifies the commercial vacuum and floor-care brands associated with the Type 2 connection configuration.
Check the Connection Size
The tool features a 1-1/2" neck size and is designed to fit compatible 1-1/2" hose or cuff connections. Verify the dimensions of your existing vacuum hose, cuff or equipment connection before ordering.
Consider the 17" Length
The extended 17" length provides additional reach compared with shorter crevice tools. This can be useful when cleaning narrow spaces, along edges or around equipment where a longer tool can make access easier.
Key Buying Considerations
- Tool Type: Crevice Tool Attachment
- Length: 17"
- Connector Type: Type 2
- Neck Size: 1-1/2"
- Hose/Cuff Fit: 1-1/2"
- Construction: High-impact polystyrene
- Color: Black
- Design: Angled end
Verify Compatibility Before Ordering
Use the complete compatibility guide in the Overview section to identify whether your vacuum equipment is associated with the Type 2 connector. Because connection configurations can vary between equipment, verify your existing connection dimensions before ordering.
Frequently Asked Questions
What is this vacuum crevice tool used for?
This 17" crevice tool is designed for commercial vacuum cleaning applications where extended reach is useful for cleaning narrow spaces, edges, around equipment and other difficult-to-access areas.
What connector type does this crevice tool use?
This crevice tool uses a Type 2 connector. Refer to the compatibility guide in the Overview section for the commercial vacuum brands associated with the Type 2 connection.
What size hose does this crevice tool fit?
The tool features a 1-1/2" neck size and is designed to fit compatible 1-1/2" hose or cuff connections.
How long is the crevice tool?
This crevice tool is 17" long, providing extended reach for narrow and confined cleaning areas.
What is the crevice tool made from?
The tool is constructed from high-impact polystyrene and has a black finish.
Does the crevice tool have an angled end?
Yes. The tool features an angled end that can help position the vacuum opening into narrow spaces and along edges.
What brands are compatible with this crevice tool?
The Type 2 compatibility guide lists Black & Decker®, Castex®, Dayton®**, Doyle®, General Floorcraft®, Goodway®, Hoffman®, Hoover®, Kaivac®, Kent® (Nilfisk)®, Lamson® (Gardner), Master Power®, NSS®, Nikro®, Nobles®, Pullman®, Sears®**, Shop-Vac®**, Star® and Tennant® as brands associated with the Type 2 connector.
Is this crevice tool sold individually?
Yes. This crevice tool is sold as 1 each.
What should I verify before ordering?
Verify that your equipment uses the appropriate Type 2 connection and that your hose or cuff is compatible with the tool's 1-1/2" neck size. The complete compatibility guide in the Overview section provides the listed brands for the Type 2 connector.
Frequently Asked Questions
What is this vacuum crevice tool used for?
This 17" crevice tool is designed for commercial vacuum cleaning applications where extended reach is useful for cleaning narrow spaces, edges, around equipment and other difficult-to-access areas.
What connector type does this crevice tool use?
This crevice tool uses a Type 2 connector. Refer to the compatibility guide in the Overview section for the commercial vacuum brands associated with the Type 2 connection.
What size hose does this crevice tool fit?
The tool features a 1-1/2" neck size and is designed to fit compatible 1-1/2" hose or cuff connections.
How long is the crevice tool?
This crevice tool is 17" long, providing extended reach for narrow and confined cleaning areas.
What is the crevice tool made from?
The tool is constructed from high-impact polystyrene and has a black finish.
Does the crevice tool have an angled end?
Yes. The tool features an angled end that can help position the vacuum opening into narrow spaces and along edges.
What brands are compatible with this crevice tool?
The Type 2 compatibility guide lists Black & Decker®, Castex®, Dayton®**, Doyle®, General Floorcraft®, Goodway®, Hoffman®, Hoover®, Kaivac®, Kent® (Nilfisk)®, Lamson® (Gardner), Master Power®, NSS®, Nikro®, Nobles®, Pullman®, Sears®**, Shop-Vac®**, Star® and Tennant® as brands associated with the Type 2 connector.
Is this crevice tool sold individually?
Yes. This crevice tool is sold as 1 each.
What should I verify before ordering?
Verify that your equipment uses the appropriate Type 2 connection and that your hose or cuff is compatible with the tool's 1-1/2" neck size. The complete compatibility guide in the Overview section provides the listed brands for the Type 2 connector.