Rear Replacement Squeegee Blade for ICE i18 and Legacy Stinger 18E Floor Machines
Maintain reliable water recovery during routine floor cleaning with the 8118022 Rear Replacement Squeegee Blade. Designed for compatible ICE i18 floor machines and Legacy Stinger 18E automatic floor scrubbers, this replacement component helps collect dirty water and cleaning solution from the floor after scrubbing.
The rear squeegee blade is an important part of an automatic floor scrubber's water recovery system. When the blade becomes worn or damaged, it may no longer maintain consistent contact with the floor, potentially leaving excess moisture, streaks or residual cleaning solution behind. Replacing a worn blade as part of regular equipment maintenance helps support effective water pickup and consistent cleaning results.
Product Highlights
- Replacement rear squeegee blade for compatible ICE i18 floor machines
- Designed for the Legacy Stinger 18E floor scrubber
- Helps recover dirty water and cleaning solution after scrubbing
- Supports routine floor scrubber maintenance
- Replacement part number: 8118022
Compatible Floor Machines
This replacement blade is intended for the following floor cleaning equipment. Compare your machine with the images below and verify the model and existing squeegee configuration before ordering.
Designed for compatible ICE i18 floor machines. Replace a worn rear squeegee blade to help maintain consistent water recovery during routine scrubbing operations.
For the Legacy Stinger 18E, this replacement blade helps support the rear squeegee assembly's role in collecting water from the floor after scrubbing.
Why Replace a Worn Rear Squeegee Blade?
The rear squeegee assembly helps direct recovered water toward the floor scrubber's recovery system. Over time, normal use can wear the blade edge or cause damage that affects floor contact. A blade that no longer follows the floor evenly may leave behind excess water or inconsistent drying results.
Inspect the squeegee blade regularly and replace it when wear or damage begins to affect water pickup. Maintaining the blade alongside other routine floor machine maintenance can help keep cleaning operations consistent and reduce the need to revisit wet areas.
Compatibility Reminder: This listing is intended for compatible ICE i18 floor machines and the Legacy Stinger 18E. Confirm your exact machine model and squeegee assembly before ordering, particularly if your equipment has been modified or previously fitted with a different replacement blade.
Buying Guide: 8118022 Rear Replacement Squeegee Blade
Choosing the correct rear squeegee blade is essential for maintaining water recovery on an automatic floor scrubber. The 8118022 Rear Replacement Squeegee Blade is intended for compatible ICE i18 floor machines and the Legacy Stinger 18E. Verify your machine model and existing squeegee assembly before ordering.
Start by identifying the exact floor scrubber model that requires a replacement blade. This part is intended for compatible ICE i18 floor machines and the Legacy Stinger 18E.
- Check the model identification label on your machine.
- Compare your equipment with the machine images in the Overview section.
- Confirm the replacement part number against your existing equipment documentation when available.
Automatic floor scrubbers use a squeegee assembly to collect dirty water and cleaning solution after the scrubbing process. This product is identified as a rear replacement squeegee blade, so confirm that the rear blade is the component you need.
If you are replacing a blade that has become worn, damaged or uneven, inspect the complete squeegee assembly to determine whether any additional components also require attention.
A worn or damaged squeegee blade can contribute to streaks, residual water or inconsistent drying. Regular inspection helps identify when replacement may be necessary to maintain effective water pickup.
- Inspect the blade edge for visible wear or damage.
- Look for uneven contact with the floor.
- Check for persistent water trails after scrubbing.
- Follow the machine manufacturer's instructions for blade replacement and squeegee adjustment.
Before purchasing, verify that part number 8118022 matches your machine and rear squeegee assembly. If your equipment has been modified or fitted with a different assembly, compare the existing blade and consult the equipment documentation to confirm fitment.
Recommended for Compatible ICE i18 and Legacy Stinger 18E Machines
Choose the 8118022 Rear Replacement Squeegee Blade when maintaining a compatible ICE i18 floor machine or Legacy Stinger 18E and you have confirmed that this part matches the rear squeegee assembly. Verifying fitment before ordering helps avoid selecting the wrong replacement component.
Consider Replacement When
The existing rear squeegee blade shows wear or damage, or the machine leaves more residual water than expected despite proper operation and adjustment.
Verify Before Ordering When
You are unsure of the machine model, need a blade for a different squeegee position or have an assembly that differs from the original equipment configuration.
Applications for the 8118022 Rear Replacement Squeegee Blade
The 8118022 Rear Replacement Squeegee Blade is intended for compatible ICE i18 floor machines and Legacy Stinger 18E automatic floor scrubbers. The rear squeegee plays an important role in collecting dirty water and cleaning solution after scrubbing, helping maintain effective water recovery during commercial floor cleaning.
Support routine maintenance of automatic floor scrubbers used to clean commercial facilities. Replacing a worn rear squeegee blade can help restore consistent contact with the floor and support effective recovery of dirty water during normal operation.
Automatic floor scrubbers help maintain large floor areas where water recovery is important for keeping traffic areas ready for use. Inspect the rear squeegee blade regularly and replace it when wear or damage affects pickup performance.
Maintain floor scrubber performance in retail environments where clean, dry floors support daily operations. A properly maintained rear squeegee helps collect cleaning solution and recovered water during the scrubbing process.
Support scheduled floor care in educational buildings, public facilities and other institutional environments. Routine squeegee inspections can help identify worn blade edges before they begin to interfere with consistent water recovery.
Keep compatible automatic floor scrubbers maintained for routine cleaning in production and work areas. Inspect the rear blade for wear, damage and uneven contact, and follow the equipment manufacturer's maintenance procedures when replacing or adjusting the squeegee assembly.
Signs Your Rear Squeegee Blade May Need Replacement
- Visible wear, tears or damage along the blade edge
- Uneven water pickup across the cleaning path
- Water trails or residual moisture left behind during scrubbing
- Reduced recovery performance after checking machine settings and other possible causes
Confirm Compatibility: This replacement blade is intended for compatible ICE i18 floor machines and the Legacy Stinger 18E. Verify that part number 8118022 matches your exact machine and rear squeegee assembly before ordering.