Oil Vanisher
Two-minute oil stain remover extracts oil stains from concrete, asphalt and pavers, as well as garages, fuel pumps, drive-throughs and parking areas. Soaks into the surface, breaks up the oil and lifts the stains. Safe to use on concrete, asphalt, brick, paving tiles and cement.
Usage Guide
Concrete & Pavers:
Add the Oil Stain Remover to the stained area, then apply half the amount of water to that area. Use a brush to agitate the location for 1 to 2 minutes. Make sure the stain does not dry.
Add more product and water if necessary. Rinse the area completely with clean, high-pressure water. Repeat the application if necessary.
Asphalt:
Add oil Stain Remover to the stained area, then apply half the amount of water to the area. Use a brush to agitate the location for 30 seconds. Rinse the area completely with clean, high-pressure water.
Note: A long dwell time is NOT RECOMMENDED because of the oil content in asphalt.
